Users set of parameters ( Please refer to the Chinese version of that )
ID	Function	Code	Default value	SMS Format	Parameters	Description	SMS Reply
1	Telephone number set up	HM		1234*HM*139xxxxxxxx* 139xxxxxxxx* 130xxxxxxxx* 1060577xxxxxxxx#	Set 1 ～4 phone numbers,  Each number up to 16 digits	Up to four telephone numbers, After the number of new,  The original number by the new numbers in place of	Connect the alarm telephone numbers
2	Change Password	MM	1234	1234*MM*8888*8888#	4 digits or letters	old password:1234 new password: 8888	One Device password:8888
3	Edit device name	DH	Transformer	1234*DH*One Device#	1～8 Chinese characters	One device name is "One device"	One Device
4	Temperature alarm set value	WBT	80 105	8888*WB*75*WT*100#	000～125	Over-temperature alarm set for 75 ℃ temperature  Tripping temperature of 100 ℃	One device Alarm temperature 75 ℃,  Trip temperature 100 ℃
5	Value of current alarm settings	LBGL	200 150	8888*LB*1000*GL*800#	Current ratio：0000～2000 Alarm value：0000～2000	Current transformer current ratio of 1000:5;  Alarm set value is 800A	One device 1000:5 current ratio, current 800A
6	Alarm set value voltage	DYGY	165 264	8888*DY*165*GY*264#	000～500	Low-voltage alarm set value is 165V,  Alarm value of high-voltage 264V	One low-voltage equipment, 165V, High Voltage 264V
7	Automatic security time interval	FG	4	8888*FG*4#	0～9	Set up a garrison to restore security after the automatic time interval	4h interval automatic security
8	Inspection interval	SJ	24	8888*SJ*48#	00～99	Set time intervals for inspection within 48 hours	Inspection interval 48h
9	The contents of the standby interface alarm	J1		8888*J1*Open the door* J3*Note#	1～8 Chinese characters	Such as: doors on the 1st detection port switch;  Gas port on the 3rd relay  (Each no more than the contents of eight Chinese characters)	J1 One equipment cabinet doors open,  J3 gas relay
10	Alarm from a defended position	CF		8888*CF#		A state of alarm from the monitor, there is alarm  Also send text messages without warning	One device has been moved away
11	Security alarm	SF		8888*SF#		To enter a state of alarm monitoring	Inspection SMS
12	Query status	ZT		8888*ZT#		Query the status of equipment, real-time work	Inspection SMS
13	Remote tripping	TZ		8888*TZ#		Remote control device tripping	One device remote control tripping
14	Remote switch	HZ		8888*HZ#		Switch on the remote control equipment	One device remote control switch
Note: 5 corresponds to the number of back-up interface.。   Set alarm values for each parameter can be sent to "#" is the end, but up to a maximum of more than 65 characters, all uppercase letters. Parameter set to "0", this feature off.     Such as equipment used for the first time when the code set up, temperature, current, voltage alarm value: 1234 * DH * One device * WB * 80 * WT * 120 * LB * 200 * LC * 150 * DY * 165 * GY * 264 #,     At this point I set the device code-named equipment, alarm temperature: 80 ℃; tripping temperature: 120 ℃; transformer current ratio: 200:5; current overload alarm: 150A; low-voltage alarm: 165V; high-voltage alarm: 264V.     Set message to send, no reply alarm, check whether or not to send the correct message format and re-sent.